Grandstream GXV-3000 SIP Videophone H.264 Protocol
The Grandstream GXV-3000 features an adjustable advanced VGA resolution
camera sensor (with 1-touch ON/OFF switch for privacy control), a
razor-thin 5"6-inch TFT color LCD with stunning picture quality
(2-dimensionally rotatable to allow nearly all viewing angles), 5
navigation keys, 3 line indicators (each of which supports independent
SIP account), visual voice/video message indicator, hands-free
speakerphone with advanced acoustic echo cancellation, dual 10M/100M
Ethernet ports (switch or router mode configurable), 2 USB ports, 2.5mm
headset jack, and RCA style audio/video output jack to allow
simultaneous video output to TV.
Features:
- Adjustable advanced VGA resolution camera sensor (with 1-touch ON/OFF switch for privacy control)
- 5"6-inch TFT color LCD (2-dimensionally rotatable to allow nearly all viewing angles)
- 5 navigation keys
- 3 line indicators (each of which supports independent SIP account)
- Visual voice/video message indicator
- Hands-free speakerphone with advanced acoustic echo cancellation
- Dual 10M/100M Ethernet ports (switch or router mode configurable)
- 2 USB ports
- 2.5mm headset jack
- RCA style audio/video output jack allows simultaneous video output to TV.
THIS IS THE MOST COMMON QUESTION WE GET FROM OUR CUSTOMERS ABOUT THIS PHONE:
---> Do I need a service provider? Can I make IP-to-IP call between video phones?
Yes,
you need to have an Internet Telephony Service Provider (ITSP). You can
also use “Direct IP Call” to talk to each other in an ad hoc fashion
without a SIP proxy. “Direct IP Call” can be made between two phones
if:
- both phones have public IP addresses, or
- both phones are in a same LAN/VPN using private or public IP addresses, or
- both phones can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ)
To
make a direct IP call, press OK button to bring up MAIN MENU. Select
“Direct IP Call”. Press OK key to bring up the input interface and
then key in the 12-digit target IP address. Press OK key to initiate
call.
|